Fuel Breather kit for Late Baywindow

Description

Often missing, damaged or left unattached when converting to twin carbs. It’s extremely important for the safe and efficient running of your Aircooled Type1 or Type4 engine.

No other kit exists on the market, finally there is a solution to attach your fuel tank breather easily and safely to your airfilter.

Please note that hoses may need to be cut to length and that unless your airfilter already has an inlet hole you will need to drill a 1/2 hole in order to attach a screw in barb.

Kit consists of :
3/4 hose section (if required)
1/2 hose section
1/2-3/4 brass reducer (if required)
1/2 – 4mm TPiece
4mm breather fuel hose
Elbow Barb for carb top
3/4 hose clip (29mm) (if required)
1/2 hose clip (21mm)

When placing an order please follow up with the following info to Wayoutwestiemike@gmail.com

*An image of your engine bay so that the correct kit can be sent for your individual setup.
*If you have a 1/2 or 3/4 breather outlet.

If you require your airfilter to be drilled and barb attached you have the option to send it via post to Wayoutwestie.