Weber ICT CSP Supreme Kit – Type 1 Twin Port

Description

Full Weber Ict Kit for Type 1 Engines 1500-1776

For the first time in the UK you can now buy a set of Weber ICTs that are truly ready to fit!

New Weber ICT carbs from normal suppliers don’t come jetted correctly, they will be full of dust and swarf from manufacturing, need the float heights reset, butterflies and mixture setup.
I only supply CB performance manifolds and German CSP Bellcrank linkages. I do not supply poor quality empi manifolds or hexbar linkages as these cause running issues. Empi are cheap to supply which is why many kits ‘appear’ to be cheaper. But long term it will cost in excess of £300 alone to rejet, change the manifolds and linkage to a setup that will actually work.
Wayoutwestie provides everything you need to install and go, a true plug and play kit that has been fully sorted for your air-cooled VW. With full instructions provided and simple tools you can have better MPG and Horsepower in no time!

What’s included?
Genuine Brand new Weber 34 ICTs
CSP Bellcrank linkage, built and ready to fit.
CB performance manifolds or equivalent built and ready to fit including balance pipe and gaskets.
Fuel Pressure Regulator- Malpassi Petrol King
5.6mm Ethanol resistant Fuel line (3 meters)
10 x 11-13mm hoseclips
6mm Tpiece
Preheat block offs
Carbs stripped and deep cleaned to remove dust and swarf from manufacturing.
Rejetted to your engine size
Float heights set
Butterflies and mixture screws set for first running
Bench tested
Airfilter tapped for breather attachment
Fitting Instructions
Please be advised Airfilters will be K&N style or Pod style filters depending on stock availability. If you require a specific filter style please advise at the time or ordering.
This Supreme Kit Also Includes ;
A carburettor sync gauge / airflow tool to enable to your sync your twin carbs. An vital bit of kit for any twin carb setup.
An inline fuel pressure tester. Complete with 6mm barbs and gauge that reads 0-15psi. Imperative for setting up your Weber ICT’s with the require MAX 2.1 psi fuel pressure.
Oil Breather hose
Distributor vacuum hose
11mm slimline manifold nuts

T&C’s

All Kits are processed by hand to ensure they are setup perfectly for your engine to fit and tune. A lead time of approximately 2-3 weeks is required, this may increase (during peak summer season) please contact me for accurate lead times.

Additional Promo codes are only valid on full-priced items.