A Full Engine Service should be completed every 3000 miles as a minimum and includes ;
- Oil change & new strainer/filter.
- Clean & Gap or replace plugs & points, rotor arm, dissy cap, condensor, fanbelt & ignition leads.
- Set valve gap & replace rocker gaskets.
- Adjust timing.
- Adjust carburetor(s).
- Air filter change if applicable.
A General Service should be completed every 5000 miles or every 12 months as a minimum and includes ;
- Chassis Grease-up
- Inspect / replace wiper blades and washer fluid
- Check Clutch free play
- Adjust Brakes & check brake fluid
- Check gearbox fluid level.
- If any additional faults are found they will be highlighted to you.
A fuel line check / replacement service is also available.